Routine maintenance can identify potential failures before they occur, eliminating unscheduled service calls and equipment down-time. In general, industry pros recommend that maintenance be performed every 250 hours of use to ensure equipment safety and reasonable service life.
Preventative Maintenance Programs are the best way to get the most out of your equipment investment:
- Rapid response time for emergency repairs
- Inspect and test product safety features / mechanisms
- Inspect and adjust drive, timing and running belts
- Check for worn cables, belts, pulleys
- Clean and lubricate chains, bearings and guide rods
- Check and log mileage, amp draw and diagnostic / error codes
- Check auto-lube wax levels, motor brushes / commutator
- Adjust / tighten loose hardware, cables and belts, belt tracking
- Perform full function tests
- Thoroughly wipe down equipment, vacuum under motor / side covers
Call us for a Preventative Maintenance Program price quote today!
Silver Preventative Maintenance Plan
Cardio Equipment
Inspecting of all treadmill decks; adjusting all belts; inspecting elevation systems and moving parts, chains and gears; lubricating all visible pivot points; keypad function tests; inspecting all moving parts for signs of wear and tear; and calibrating and testing units for safe operation.
Strength Equipment
Inspecting of upholstery and all cables, belts, pulleys, upholstery and frames for signs of wear and tear; inspecting all zerks, adjustment pins, guide rods, bushings, seat slides and all moving parts; lubricating guide rods and calibrating and testing all units for safe operation.
Gold Preventative Maintenance Plan
Cardio Equipment
Internal cleaning and vacuuming; waxing treadmill decks; adjusting all belts; lubricating elevation systems and moving parts, chains and gears; keypad function tests; inspecting all moving parts for signs of wear and tear; and calibrating and testing units for safe operation
Strength Equipment
Cleaning upholstery and inspecting all cables, belts, pulleys, upholstery and frames for signs of wear and tear; lubricating all zerks, adjustment pins, guide rods, bushings, seat slides and all moving parts; and calibrating and testing all units for safe operation.
Platinum Maintenance Plan
Treadmills
- Inspect and Adjust Running Belt
- Inspect Deck for Wear and Wax Levels
- Vacuum Interior/Exterior
- Clean Hood
- Clean Frame
- Inspect Drive Belt
- Inspect Rollers
- Check Motor Brushes
- Lubricate Lift
- Inspect Wheels
- Inspect Shock Absorption System
- Diagnose Errors
- Check Mileage and/or Hours
- Check Amp Draw
Steppers
- Clean Covers
- Clean Frame
- Vacuum Interior
- Clean Friction Belt
- Grease Pivots
- Check Springs
- Check Cables
- Lubricate Chains
- Check Shocks
- Check Electrical Connections
- Check Alternator Brushes
- Check Handrails
- Diagnose Errors
- Record Usage/Hours
Excercise Bikes
- Clean Covers
- Clean Frame
- Clean Pedals
- Inspect Drive Belt
- Inspect Alternator Brushes
- Inspect Cranks
- Check Electrical Connections
- Check for Proper Resistance Levels
- Check Battery
- Record Usage/Hours
- Diagnose Errors
Spin Bikes/Ellipticals
- Clean Handlebars
- Clean/Polish Chrome
- Clean Flywheel
- Clean Hub Assembly
- Clean & Inspect Turbo Chain
- Adjust/Tune Up Bike for Proper Tension and Performance
- Lubricate All Moving Components
- Lubricate Bearings
- Lubricate all Pop-In Pin Assemblies
Strength
- Lubricate Guide Rods with Special Cleaner
- Grease Fittings
- Check Bushings
- Tighten Nuts
- Check Upholstery for Tears or Excessive Wear
- Adjust Plates
- Check Cables for Fraying & Proper Tension
- Check Functionality of Machine for Safety
Spin Bikes/Ellipticals
- Clean Handlebars
- Clean/Polish Chrome
- Clean Flywheel
- Clean Hub Assembly
- Clean & Inspect Turbo Chain
- Adjust/Tune Up Bike for Proper Tension and Performance
- Lubricate All Moving Components
- Lubricate Bearings
- Lubricate all Pop-In Pin Assemblies
